TDA7350 Entegresi ile Yapılan 22W Bridge-11W Stereo Amplifikatör Devresi

guclusat

Tanınmış Üye
Süper Moderatör
This electronic circuit project is a class AB audio power amplifier designed using the TDA7350 IC manufactured in a Multiwatt package .The TDA7350 audio power amplifier require few external components and can be used in stereo mode or mono (bridge ) mode .
The TDA7350 audio power amplifier has many features like : high output power , no noise on on/off switch , programmable turn-on delay , ac-dc short circuit protections , overrating temperature protection and more . For this power amplifier we need to use a 4 ohms or 2 ohms speakers .
If we use stereo configuration the output power is 11W on 2 ohms and 6.5W on 4 ohms with 10% distortion and if we use the bridge mode the output power is 20 W on 4 ohms speaker .
For this power amplifier is need a dc power supply with a maximum output voltage of 18 volts ( the typical power supply needed by this power amplifier IC is 14.4 volts ) .


TDA7350-stereo-circuit.jpg

TDA7350-mono-bridge-circuit.jpg



Teyplerde Kullanılıyor genelde.Bridgesi çok sağlam Stereoda güzel Ses veriyor.
 

Eklentiler

  • TDA7350-mono-bridge-circuit.jpg
    TDA7350-mono-bridge-circuit.jpg
    32,2 KB · Görüntüleme: 0
  • TDA7350-stereo-circuit.jpg
    TDA7350-stereo-circuit.jpg
    37,2 KB · Görüntüleme: 0
Son düzenleme:
Geri
Yukarı