The Basic Throttle

guclusat

Tanınmış Üye
Süper Moderatör
The first circuit is a 2 Amp, 0-12 Volt, voltage regulator type circuit. It uses a 10K ohm potentiometer to control the output voltage and has a light emitting diode that will indicate an overload condition. A DPDT toggle switch controls the train direction. The TIP142 output transistor will need a heat sink to keep it cool and the 0.33 ohm resistor should have a 5 Watt power rating. The OPAMP is one half of an LM 358. One quarter of a LM 324 could also be used.

upload_2019-12-9_3-54-28.png

Türkçe çeviri :
Birinci devre 2 Amper, 0-12 Volt, voltaj regülatörlü tip bir devredir. Çıkış voltajını kontrol etmek için 10K ohm'luk bir potansiyometre kullanır ve aşırı yük durumunu gösteren bir ışık yayan diyota sahiptir. Bir DPDT geçiş anahtarı, tren yönünü kontrol eder. TIP142 çıkış transistörünün soğuması için bir ısı emiciye ihtiyacı olacaktır ve 0,33 ohm'luk direncin 5 Watt güç derecesine sahip olması gerekir. OPAMP, bir LM 358'in yarısıdır. Bir LM 324'ün dörtte biri de kullanılabilir.
 
Son düzenleme:
Geri
Yukarı