1. Bu site çerez kullanmaktadır. Siteyi kullanmaya devam etmeniz halinde çerez kullanımı ile ilgili site koşullarını kabul etmiş sayılırsınız. Daha Fazlasını Öğren.
  2. Forum İllegal Uyarısı Forum kuralları gereği forumda video ve illagal paylaşım yapmak yasaktır.Program Arşivimizde ise kısıtlanmış sürüm yada dağıtımı serbest olan (trial - freeware) yazılımlar yayınlayınız..Aksi takdirde mesajlarınız silinecektir..

Tüm Çin Telefonlarının Gizli Kodları

Konusu 'Diğer Model Cep Telefonları' forumundadır ve guclusat tarafından 15 Temmuz 2009 başlatılmıştır.

  1. guclusat
    Offline

    guclusat Tanınmış Üye Süper Moderatör

    Katılım:
    14 Haziran 2009
    Mesajlar:
    9.754
    Ödül Puanları:
    48
    Bilmiyorsanız HIg Speed Sım e basmayın



    ALL CHINA MOBILES CODE
    LL CHINA MOBILES CODE
    *#66*# Set Factory Mode CONFIRMED
    *#8375# Show Software Version CONFIRMED
    *#1234# A2DP ACP Mode CONFIRMED
    *#1234# A2DP INT Mode CONFIRMED
    *#0000# + Send : Set Default Language CONFIRMED
    *#0007# + Send : Set Language to Russian CONFIRMED
    *#0033# + Send : Set Language to French CONFIRMED
    *#0034# + Send : Set Language to Spanish CONFIRMED
    *#0039# + Send : Set Language to Italian CONFIRMED
    *#0044# + Send : Set Language to English CONFIRMED
    *#0049# + Send : Set Language to German CONFIRMED
    *#0066# + Send : Set Language to Thai CONFIRMED
    *#0084# + Send : Set Language to Vietnamese CONFIRMED
    *#0966# + Send : Set Language to Arabic CONFIRMED
    CHINESE MODELS:
    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    set default language: *#0000# Send
    set English language: *#0044# Send
    set English language (new firmware): *#001# Send also
    ==========
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Motorola:
    Motofone F3 software version: **9999* Send
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    ZTE Mobile1- *938*737381#
    2- PHONE WILL DIPLAYED DONE
    3- POWER OFF YOUR PHONE AND POWER ON AGAIN
    alcatelE205
    unlocking phone code,only press***847# without simcard
    E900 software version: *#5002*8376263#
    E900 full reset: *2767*3855#
    Service codes Spice:
    S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
    S410 engineer mode: *#3646633#
    S900 software version: *#8375#
    S900 seriyal no: *#33778#
    Service codes Philips:
    S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
    Service codes "Chinese" models:
    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes VK-Mobile 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    service menu: *#85*364# (hold #)
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    KG300 NVRAM format: 2945#*# -> menu 15
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    M100 software version: ####0000#
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Motofone-F3:
    Motofone F3 software version: **9999* Send
    ***300* Set SIM Pin
    ***310* / ***311* SIM Pin ON | OFF
    ***000* Reset Factory settings
    ***644* Set Voicemail number
    ***260* / ***261* Auto keypad lock ON | OFF
    ***510* / ***511* Voice Prompts ON | OFF
    ***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
    ***200608* Send: software version
    ***200606* Send: software version
    ***200806* Send: flex version
    ***250* / ***251* Keypad tones ON | OFF
    ***470* Select time format
    ***500* /***501* Prepaid Balance Display ON | OFF
    ***520* Change language
    Service codes Motorola:
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    and "yes"''
    chiniss cord & pin out
    some chinese Mobile Code And Pinouts :::::::::::>>>>>>>>>
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    All China Mobiles Code - GSM-extreme http://www.gsm-extreme.net/showthread.php?t=21988
    Set language to Russian: *#0007#
    Service codes Motorola:
    Motofone F3 software version: **9999* Send
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    ZTE Mobile1- *938*737381#
    2- PHONE WILL DIPLAYED DONE
    3- POWER OFF YOUR PHONE AND POWER ON AGAIN
    alcatelE205
    unlocking phone code,only press***847# without simcard
    E900 software version: *#5002*8376263#
    E900 full reset: *2767*3855#
    Service codes Spice:
    S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
    S410 engineer mode: *#3646633#
    S900 software version: *#8375#
    S900 seriyal no: *#33778#
    Service codes Philips:
    S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
    Service codes "Chinese" models:
    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes VK-Mobile 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    service menu: *#85*364# (hold #)
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    KG300 NVRAM format: 2945#*# -> menu 15
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    M100 software version: ####0000#
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Motofone-F3:
    Motofone F3 software version: **9999* Send
    ***300* Set SIM Pin
    ***310* / ***311* SIM Pin ON | OFF
    ***000* Reset Factory settings
    ***644* Set Voicemail number
    ***260* / ***261* Auto keypad lock ON | OFF
    ***510* / ***511* Voice Prompts ON | OFF
    ***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
    ***200608* Send: software version
    ***200606* Send: software version
    ***200806* Send: flex version
    ***250* / ***251* Keypad tones ON | OFF
    ***470* Select time format
    ***500* /***501* Prepaid Balance Display ON | OFF
    ***520* Change language
    Service codes Motorola:
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    and "yes"''
    .................................................. ...............................
    N95Pda and N95S Pinout
    2x5
    4:Rx
    5:TX
    6:GND
    .................................................. ...............................
    K1 Moto Pinout
    4:Rx
    5:Tx
    6:Gnd
    .................................................. ...............................
    PDA ZT6618
    1........8 pin mini Conector
    3:Rx
    4:TX
    5:Gnd
    .................................................. ...............................
    Cect 8380
    1..........8 pin mini Conector
    1:Gnd
    2:Rx
    3:Tx
    .................................................. ...............................
    KG-200
    4:Gnd
    3:Tx
    2:Rx
    .................................................. ...............................
    N91I
    1..............12 pin Connector
    .
    5:Gnd . 12:Tx
    6:Tx . 13:Rx
    7:Rx .
    ==============================================
    All Chinese Mobile Code And Pinouts
    --------------------------------------------------------------------------------
    hi
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Motorola:
    Motofone F3 software version: **9999* Send
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    ZTE Mobile1- *938*737381#
    2- PHONE WILL DIPLAYED DONE
    3- POWER OFF YOUR PHONE AND POWER ON AGAIN
    alcatelE205
    unlocking phone code,only press***847# without simcard
    E900 software version: *#5002*8376263#
    E900 full reset: *2767*3855#
    Service codes Spice:
    S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
    S410 engineer mode: *#3646633#
    S900 software version: *#8375#
    S900 seriyal no: *#33778#
    Service codes Philips:
    S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
    Service codes "Chinese" models:
    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes VK-Mobile 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    service menu: *#85*364# (hold #)
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    KG300 NVRAM format: 2945#*# -> menu 15
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    M100 software version: ####0000#
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#
    Service codes Motofone-F3:
    Motofone F3 software version: **9999* Send
    ***300* Set SIM Pin
    ***310* / ***311* SIM Pin ON | OFF
    ***000* Reset Factory settings
    ***644* Set Voicemail number
    ***260* / ***261* Auto keypad lock ON | OFF
    ***510* / ***511* Voice Prompts ON | OFF
    ***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
    ***200608* Send: software version
    ***200606* Send: software version
    ***200806* Send: flex version
    ***250* / ***251* Keypad tones ON | OFF
    ***470* Select time format
    ***500* /***501* Prepaid Balance Display ON | OFF
    ***520* Change language
    Service codes Motorola:
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    and "yes"''
    .................................................. ...............................
    N95Pda and N95S Pinout
    2x5
    4:Rx
    5:TX
    6:GND
    .................................................. ...............................
    K1 Moto Pinout
    4:Rx
    5:Tx
    6:Gnd
    .................................................. ...............................
    PDA ZT6618
    1........8 pin mini Conector
    3:Rx
    4:TX
    5:Gnd
    .................................................. ...............................
    Cect 8380
    1..........8 pin mini Conector
    1:Gnd
    2:Rx
    3:Tx
    .................................................. ...............................
    KG-200
    4:Gnd
    3:Tx
    2:Rx
    .................................................. ...............................
    N91I
    1..............12 pin Connector
    .
    5:Gnd . 12:Tx
    6:Tx . 13:Rx
    7:Rx
     
  2. guclusat
    Offline

    guclusat Tanınmış Üye Süper Moderatör

    Katılım:
    14 Haziran 2009
    Mesajlar:
    9.754
    Ödül Puanları:
    48
    *#66*# Fabrika Modu (telefonunuzla ilgili donanım bilgileri ve normal çalışma şekilleri)
    *#8375# Software Version gösteren kod
    *#3646633# Teknik mod.
    *#87#
    bu kombinasyon da telefonunuzun özelliklerini test amaçlıdır



    *#0000# + SimA Cevap : standart dile döner
    *#0007# + SimA : Dil Russian
    *#0033# + SimA : Dil French
    *#0044# + SimA : Dil English
    *#0966# + SimA : Dil Arabic CONFIRMED
    bunlar benim denediğim kodlar


    bilmediğiniz bir işlemi yapmaın zararı cebinize olabilir...
    buradaki kodlar sadece bilgi amaçlıdır.
     
Yüklüyor...

Sayfayı Paylaş